Відео

try them with them while side sleeping.

Do you know if the philips resperonik dreamstation has that altatude presuse adjuster? Nice video you deserve more views.

Distilled water is NOT worth carrying around - non-distilled will not shorten machine life & limescale will be cleaned away anyway as part of your machine cleaning routine. Instead use tap [faucet] water or if you're concerned about additives, buy bottled drinking water. At home I just use UK tap water & all's well. For cleaning citric acid [lemon juice] is very good for all parts, tubes, nearly all masks [except foam-type masks] - better than the odours of vinegar or soaps!

I keep coming back to this video. Clear and concise with the added bonus of a neat accent :)

Set up bipap

It’ll better if your description of the setting value means at 4:11, for example EPR Level 1, 2, or 3 means 3 is easiest breathing out effort, instead of “you can adjust the level to the most comfortable to you” since people have no idea what the number means that why they rely on instructional guide their decision like these

I replace my filter every two weeks, bought cheaper after Market filters. Please note this filter is more for the machine, not for clean patient air. If you have indoor air problems those need attention by using inside air filtration devices that clean the air.

Awesome hack, will try tonight.

I had to replace my Airsence 11 tub after 3 months. There was micro cracks all over the tub. I was pretty gentle with it. Will see how long the new one lasts. I have only ran out of water once.

How do I find the past pressure settings? I switched it and it didn't work out, so I'm trying to go back to what it was before I changed it. The download able report doesn't seem to show pressure settings.

Thank you so so much for this! 🙌

Thank you! I really needed this!

it's not on Resmed's website... is it truly available?

The noise from mine is coming directly from the motor speeding up and slowing down. How do you fix that?

Hey Can u help me !!! I was sleeping fine and good deep sleep for 7-8hrs daily but for last 3days I can’t sleep more than 2-3hrs and have a lot of anxiety and pressure that I have fatal insomnia 😢.How can I get back to sleep or will I die in 18months I am only 21😢

Outstanding video thank you so much!

I'm hoping you can help me with this question. Why does my ResMed 11 screen dim intermittently ? I don't like this. I want screen to be bright when I'm adjusting things.

I am using the F20 with foam edge never upgraded to the f 30

Very helpful for me as a first time Bi-pap user.

Hey Jason, thanks for everything. I just sent in my old recalled one. Do you think I'll get the hundred bucks?

Thank you 👍

😮 can you track your user data for Air mini ?.

Useful video but there is absolutely no need for that distracting background music. Really puts me off watching further videos.

Creates too much moisture.

At a certain point, it doesn't really matter. I've used the Resmed 10 and currently the 11. No matter if in a hotel sharing the room with a friend, or in my same bed with a girlfriend, the 11 is not loud enough to bother a soul, so it meets my minimum criteria. I'm just wondering if the Airmini would be too loud in a hotel situation but it's easy enough taking my 11 on trips with its great carry case.

How do adjust the pressure minimal to three, maximum to 10 please

Thanks!

Hello, thanks for the video. I have a question, I see cpap 1 cpap 2 cpap 3 on the device screen, but it does not show apap mode, this mode is visible in your videos. It was visible on me before, why could it be?

Thank you--very quick, very good explanation. I have all the symptoms of too high pressure--most worrying is very dry throat in the morning. Moved from 10 max to 8--hoping for better result

The FDA literally has a video warning about using UV and ozone specifically for CPAP. There is some evidence that UV will damage your gear and ozone may actually harm your health. Any channel that isn’t upfront about this probably isn’t trustworthy. Just use a soap and water and you’re good.

Too much background 'music', therefore you are harder to understand than necessary.

You have suggested purchasing more components in an effort to try and make an expensive design flaw quieter. None of these suggestions will work. The filter housing with the exhale vent is the issue and needs to be redesigned. Resmed needs to listen to it's customers and release an updated solution yesterday.

Bluetooth is turned off but it doesn't work? And the device doesn't switch to apap mode, why?@respshop

What does FLEX mean on ehe settings?

I have always had a lower heart rate, the lowest I had it medically recorded at was 36bpm after I just had a large coffee. My heart rate was normally 45-55bpm as a child (I was not athletic but skinny). As long as I can remember, I have had moments in the daytime where I audibly gasp for air which is completely out of my control. I never knew this not normal until this morning. I am 38 years old...

Proprietary power adapter. Power adapter is larger than the CPAP unit. USB-C or not buying.

Horrible mask the nasal just too small

Any advice on how to connect the generic HME with a dreamwear mask?

Thank you soooooo much! Sleeplay sent me my machine with the auto start not activated and the type of mask not activated either. You saved me so much time and money. Bless you!

My old resmed 10 would draw with heating tube/tank on close to 40 watts and heating off over 20 watts. Resmed 11 drew with heating tube/tank over 20 watts and heating off over 5 watts. I used my allpower battery bank with DC cigarette power cord and after over 10 hours with heat off it had 55% power left looks like resmed 11 is more power efficient than 10.

I love the profile, great face seal and ease of shifting around on the bed. I get a strong constant air stream coming out of the bottom of the mask. Losing 17L/hr. Is this normal? The internal flap seems to be working but the air stream is disconcerting. Is it working as designed? This is my first experience with it. Other masks I’ve used only expel air when you exhale, not constantly like this mask

This is the order of how I set up the AirMini on this video with the tips included: AirMini -> Tubing Adapter -> SlimLine Tubing -> Q-Lite Muffler -> V-Com -> Mask

what do you think about the cpap extra filter, it lowers the pressure though

Thank you for the helpful video? Where do you attach the V-com if you're also using the moisture exchanger with the muffler?

I hate that you need a prescription to buy it.

Oh my gosh…. I have the AriSense 11 amd ❤️❤️❤️ it! Its water reservoir does NOT spill, unless you try to spill it. C’MON MAN! You really gotta be clumsy to spill water out. I’ve yet to spill out one drop ever!!! #2, The noise. What noise? Seriously, my AS11 is quiet as all get go and my doctor set it at 14L of pressure. I can’t hear it at all. You get what you pay for. Fortunately for me though, my work comp insurance paid for it all.

I tried to adjust the air flow because it was too much , nothing happened it still blows too hard, I set it at 4.0.

I’m a truck driver. How do I download my info to my cellphone?

will go full menu.

I use both my 11 at home and my 10 when traveling, same settings. The 11 cannot be filled as much as the 10 without spillage, and just covers approximately 8.5 hours of sleep. My 10 covers that but also my usual one hour midday nap. My doctor has even noted the same complaint from other patients.